BRB logo Joomla

Stainless Steel and Vertical Wire - System 2

Product Summary

Architecturally pleasing vertical wire system.  It can be used for all balustrades, regards of ground or floor height below and does not suffer from loose wires over time, or from children standing on the wires.  This modular system gives the benefits of sleek modern lines with concealed fittings.
 
This stainless steel and vertical wire system fully complies with strict building codes,  and can be used on balconies where the floor height is above 4 metres (Horizontal wire systems cannot be used in these applications).
 
Pool Fencing can also be constructed with vertical wire system and meet the requirements of AS1926 (Swimming Pool Fencing regulations).
 
Can be installed as a complete free-standing system or fitted between existing posts and walls of any suitable materials. Wires are at 70mm spacing to ensure the maximum gap requirements of both balustrades and pool fencing is met.  Maximum post spacing of 980mm centre to centre with a vertical strut fitted to the midpoint.
 
Applications suitable for domestic and commercial balconies, barriers and pool fences.

Key Features

  • Modular design system, allowing quick and easy installation.
  • Marine Grade Stainless Steel.
  • Vertical barrier system with stainless steel wires at 70mm centres.
  • No visible tensioners, swages, turnbuckles, fixing, etc.
  • Strong continuous base plate.
  • An ultimate un-obscured view.
  • Very competitively priced.
  • Base plate is flush mounted or with tiles, raised to allow surface water dispersal.
  • Maximum un-obscured vision.
  • No ongoing tensioning of wires.

Specifications

BASE
   Exposed Fittings
        Cover Plate - Post
445M2 Stainless Steel
        Cover Plate - Base
445M2 Stainless Steel with pre-drilled holes @ 70mm centres
   Non Exposed Fittings
        Post Base Plate
304 Stainless Steel, 100 x 65 x 6mm
        Base Rail - Angle
Hot Dipped Galvanised, 75 x 50 x 6mm with stainless steel tensioning studs
        Wire Tensioner Plate
304 Stainless Steel
        Nut and Washer - Tensioner
304 Stainless Steel, M8
POSTS
   Exposed Fittings
        Post
316 600 Grit Stainless Steel, 50.8mm diameter
        Post to Handrail Joiner
316 600 Grit Stainless Steel flush joiner
INFILL
   Exposed Fittings
        Wire
316 Stainless Steel, 3.2mm diameter, 7 x 7 lay wire rope
        Plug - top and bottom wire
Nylon
        Brace post and locators
316 Stainless Steel, 19mm diameter
TOP
   Exposed Fittings
        Hand Rail
316 600 Grit Stainless Steel, 50.8mm diameter with key holes for wire rope
        Flush Joiners
316 600 Grit Stainless Steel, 50.8mm diameter, 90, Tee, 90 Tee and 135 Tee

Black Rock Balustrades P.O. Box 4004, BLACK ROCK VIC 3193  | ABN 39 188 501 569
Phone: +61 (03) 9598 7345 | Fax: +61 (03) 9598 7345 | Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

© Copyright 2012 Black Rock Balustrades | Terms and Conditions
 
SPASA Member - Pool Fencing