Stainless Steel and Vertical Wire with Timber Handrail - System 7A (Optional Round Stainless Steel handrail)
Product Summary
System 7A is identical to System 7, with the exception of the bottom rail being above the decking. The rail is a stainless steel channel, 40x40x40x2mm, that houses the tensioners and is typically attached to
This stainless steel and vertical wire system fully complies with strict building codes, and can be used on balconies where the floor height is above 4 metres (Horizontal wire systems cannot be used in these applications).
Pool Fencing can also be constructed with vertical wire system and meet the requirements of AS1926 (Swimming Pool Fencing regulations).
Can be installed as a complete free-standing system or fitted between existing posts and walls of any suitable materials. Wires are at 70mm spacing to ensure the maximum gap requirements of both balustrades and pool fencing is met. Maximum post spacing of 24000mm inside to inside with a vertical brace post fitted at a maximum of 630mm centres.
Applications suitable for domestic and commercial balconies, barriers and pool fences.
Key Features
- User selected timber handrail.
- Modular design system, allowing quick and easy installation.
- Marine Grade Stainless Steel.
- Vertical barrier system with stainless steel wires at 70mm centres.
- No visible tensioners, swages, turnbuckles, fixing, etc.
- Strong continuous base channel.
- An ultimate un-obscured view.
- Very competitively priced.
- Maximum un-obscured vision.
- No ongoing tensioning of wires.
Specifications
BASE | |
|---|---|
| Exposed Fittings | |
Bottom Channel | 316 Stainless Steel, 40 x 40 x 40 x 2mm, U channel |
| Hidden Fittings | |
Wire Tensioner Plate | 304 Stainless Steel |
Wire Tensioner Bolt | 304 Stainless Steel, RH and LH threaded tensioning bolt, M8/M10 |
Nut and Washer - Tensioner | 304 Stainless Steel, M8 |
INFILL | |
| Exposed Fittings | |
Wire | 316 Stainless Steel, 3.2mm diameter, 7 x 7 lay wire rope |
Plug - top keyhole | Nylon |
Brace post and locators | 316 Stainless Steel, 19mm diameter |
TOP | |
| Exposed Fittings | |
Option 1 | |
Hand Rail - Timber | Timber as per customers requirements, ex 90 x 45mm stock minimum |
Top Rail - Hand rail frame | 404 Stainless Steel, Square Hollow Section, 25mm |
Option2 | |
Hand Rail - Round Stainless Steel | 316 600 Grit Stainless Steel, 50.8mm diameter with key holes for wire rope |